The safe and simple way to apply accurate dilution rates of chemical to the surface you are wanting to clean with your commercial, domestic, or industrial pressure washer.
The ST2600s quick couple gun features the “easy pull trigger” and the “swivel hose connection” which together offer reduced strain and fatigue on your hand and wrist whilst working for longer periods of time.
The “inbuilt water-stop system” enables you to quickly swap between using the foamer bottle and any of the lances in the quick couple system, without needing to turn off your pressure washer whilst you make the changes.
The foamer head has a dilution gauge built in, enabling you to set the dial confident in the knowledge that if you need a dilution of 2% for your particular cleaning needs on a certain job, then 2% mix is what you will get.
The system allows the accuracy you need and thereby saves on unnecessary waste of expensive chemicals, whilst allowing you to ensure you are using the chemical safely within the data-sheet recommendations.
The 2L bottle simply screws into the base of the foamer head and unscrews when you are finished to allow you to swap to a plain water bottle and “rinse through” the head
after use, to remove any excess chemical and keep your equipment clean.
Additional bottles are available to purchase with, or without lids, meaning you can label and use to bottles to safely store the different chemicals you require at any given time.
The different options of foamer heads are suitable for machines from 10LPM – 21LPM please ask for advice as to which foamer is best suited to your own pressure washer.